Rune Decal

How to apply vinyl decals:

To ensure good adhesion make sure the surface is clean, free of grease, grime and dust. You can use an alcohol wipe to help. Make sure the surface is dry after cleaning!

1. Make sure your chosen surface is clean and dust free.
2. Rub over the decal with a squeegee or credit card to ensure all parts of the design are sticking to the transfer tape.
3. Turn your decal over and carefully pull the backing paper away, starting in the corner and pulling it right back on itself instead of upwards.
4. Should bits of your design lift with the backing paper, push the backing paper back in place and press the transfer paper side more firmly onto the vinyl.
5. Once the backing paper is removed, carefully lay your design sticky-side-down onto your surface.
6. Rub over the transfer tape gently at first and then a second time but more firmly. Your objective is to push the air out to the sides and have a nice flat finish.
7. Carefully remove the transfer tape the same way you did the backing paper.
8. Your decal should now be in place!

Bonus: if there is a bubble trapped under a larger piece of vinyl, you can use a pin to gently prick it and push the air out.